Introduction:
The Sawdust Carbonization Furnace, also called Environmental Continuous Gasification Carbonization Equipment, is used to convert the wood or agro waste,rice husk,sawdust,coconut shell materials containing carbon to charcoal powder under high temperature. The raw materials goes through the destructive distillation process in the oxygen-free environment to reach high carbonization degree. The materials required to be smaller than 15mm size, like sawdust, rice husks, groundnut shells, plants straws, tree barks and grinded cocont shells. So this equipment is also called Charcoal Powder Production Line.
The furnace takes full advantages of CO, methane, hydrogen and other flammable gas produced during the carbonization process and adopts the high technique of gas recovery, purification and recirculating combustion. It not only solves the air pollution caused by th heavy smoke during carbonization, but also supplies the heat energy needed by the production. Such design makes the self-sufficiency real, meanwhile, improves the continuity and economical efficienry to make full use of agroforestry waste ad change them to valuable. It is the perfect choie to suply the short of traditinal energy, also it the good raw materials for activated carbon.
Diffenerces from usual carbonization furnace:
1. Continue working,one side to feed sawdust one side to get charcoal
2. High capacity,one machine can get output 3-4tons per 6-8 hours
3. Energy saving,it used itself smoke to make ,and also no smole outside
4. Operation,.it is easy to operate by a computer.
This continue working sawdust carbonization furnace structure:
1. Gasproducer
2. Main charcoal furnace body
3. Cooling system
4.conveyor
1. Motor:18 kw
2. Capacity: 3-4 tons per shift
3. Main useful: rice husk/sawdust/wood chipper making charcoal
1.What is the carbonization rate?
This carbonization rate can reach to 99%.
2.Could you offer complete Wood Charcoal machine production line?
Yes, we will allocate suitable production line according to your special requirement, such as crusher, Gasifier Equipment, Dust-Removal Device, Gascleaner, Auto-feeding Conveyor,Cooling and Discharging Conveyor,Manual automatic dual-use electric control cabinet,etc.
3.Where is your factory located? How to get there?
We are located in Gongyi city, Zhengzhou,Henan province, China, you can come here by air or by fast train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO
We will pick you up at airport.Welcone to visit our factory.
4. Why it is no pollution ?
Smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.
When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the main furnace for heating the stove again.
5. How many containers will it load?
One 40 feet container and one 20 feet container.
